Shipping throughout Russia and to other countries

Electrical installation equipment ZE'TA PPE, PGS, U731, etc.

Branch clamps, PPE
  • Branch and spot clamps U731-U872 are designed for making branches from copper and aluminum conductors of trunk lines.
  • Insulating PPE clamps are used in the installation of electrical wiring in residential, public and industrial buildings and structures. The clamps are designed to connect copper, aluminum and aluminum-copper single-wire cores of installation wires and cables while isolating the connection points. It is not allowed to use PPE clamps in explosive, chemically active and humid environments without connecting (branch) boxes of the appropriate degree of protection. The number of connected wires in one contact node is shown in the table.
Products for grounding conductors
  • The PGS jumper is used for grounding metal structures, machine housings, and apparatuses.
  • Flags F are used for grounding metal structures, machine housings, and apparatuses.
  • Grounding conductor - Grounding conductor is used for grounding metal structures, machine housings, apparatuses, shields.
  • The K188U2 grounding busbar holder - The K188U2 holder is used to attach round and flat grounding conductors to building structures.
Products for cable banding and marking
  • Cable marking tags - designed for marking wires, cables, pipes, metal structures, etc. The surface of the tags is well suited for labeling.
Materials and accessories
  • A set of unsoldered grounding KNZ - for connecting the grounding of a metal shield or armor at the cable junctions without soldering.
  • A soldering grounding kit is used to ground a metal shield, armor, or cable sheath by soldering.
  • PPD constant pressure springs are designed to connect the grounding wire without soldering to the metal sheath or armor plates of the cable.
  • Rubber gaskets are designed for sealing and sealing fixed threaded connections of pipelines and fittings, industrial and plumbing equipment at the joints of pipes and assemblies (taps, flanges, fittings, etc.).
  • Silicone PS gaskets are designed for sealing fixed detachable connections of industrial and energy equipment. They are widely used for sealing threaded connections of shut-off valves (including pressure-sensitive ones).
  • Fluoroplastic PF gaskets (fluoroplast-4/f-4) are designed for sealing fixed detachable connections of industrial and power equipment, reliable and durable inter-fitting and flanged connections and seals.
  • Solder A, POS-30, POS-61
  • Soldering grease for tinning and soldering aluminum cores and shells, as well as soldering copper grounding wire to the steel armor of the cable.
  • Technical napkin (Calico)
  • Insulation tape

DOCUMENTS

All ZE'TA products

The group "New Technologies" offers for review the products of the plant ZE'TA: metal hose in PVC shell, terminal box, cable entry, cable lugs and other products of the plant of electrical fittings
  • Coupling couplings ZE'TA
    Coupling couplings
    MTK, MTR, etc.
  • Cable entries ZE'TA
    Cable entries
    GEM et al.
  • Electrical installation equipment ZE'TA
    Electrical installation equipment
    PPE, PGS, U731, etc.
  • Pipe wiring products ZE'TA
    Pipe wiring products
    TR, ATK, etc.
  • PVC Metal Jacket ZE'TA
    PVC Metal Jacket
    MRPI, VG, K1080, etc.
  • Boxes ZE'TA
    Boxes
    KZNS, KKO, KPL, U614, etc.
  • Cable couplings ZE'TA
    Cable couplings
    KNTp, STP, PKV, etc.
  • Connectors ZE'TA
    Connectors
    SB, GVKP, GS, etc.
  • Casings ZE'TA
    Casings
    GM, GML, GA, etc.
  • Tips ZE'TA
    Tips
    TM, PM, TAM, TA, etc.
  • Metal pipes for cable ZE'TA
    Metal pipes for cable
    16 mm, 20 mm, 63.5 mm, etc.

About ZE'TA

Established in 1999, the Plant of electrical fittings (Novosibirsk) is engaged in the production of electrical products of the ZETA trademark, constantly expanding the range, improving the level of service, introducing new technologies.

  • A WIDE RANGE OF

    The main types of products of the plant: tips and sleeves, cable couplings, terminal boxes, cast-iron explosion-proof boxes, cable entries, metal hose in PVC insulation, fittings for metal hose.

  • quality

    All ZETA products fully meet the requirements of GOST, TU and have the appropriate certificates. The plant's products are in demand by many well-known companies.

  • LOGISTICS

    Logistics centers are located in Moscow, Yekaterinburg and Novosibirsk. Maintaining the constant availability of inventory in warehouses is one of the main principles of the plant's operation.

Information Board ZE'TA

Learn more about our products ZE'TA.
  • Price list for ZETA equipment производства ЗЭТА
    Price list for ZETA equipment
  • Catalog for ZETA equipment factory ZE'TA
    Catalog for ZETA equipment
  • Coupling catalog brand ZE'TA
    Coupling catalog

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: